LicensedTrades.comTRADE LICENSE COMPLIANCE
Bonds, Insurance & Bid Readiness9 min read

Contractor Prequalification Questionnaires: Answering the Licensing and Insurance Sections

By Rovaryn Digital · November 20, 2026

A Prequal Deadline Meets a Certificate Nobody Has Checked

It is Thursday afternoon, and the general contractor's portal closes the prequalification window on Monday. The office manager at a mid-sized mechanical shop opens the form and reaches Section 4, "Licensing and Insurance." The questions look routine: license numbers for every state where the firm will work, expiration dates, bond amount and surety, insurance carriers and policy limits, and whether any license has been suspended, revoked, or lapsed in recent years.

She pulls the files. The contractor license number is easy. The bond rider is in a folder from two renewals ago. The certificate of insurance in the shared drive shows a policy period that ended last month, and nobody can say whether a newer one was issued. The CE question asks whether the qualifying individual is current on continuing education, and the answer lives in a spreadsheet maintained by a coordinator who is out until Tuesday.

None of this is unusual. A prequalification form is a request for evidence, and the evidence sits in five places under five issuing bodies. This guide walks through what the licensing, bond, insurance, and CE sections of a contractor prequalification questionnaire are really asking, how to answer each accurately, and how to keep the answers ready before the next form arrives.

What a Contractor Prequalification Questionnaire Is Really Asking

General contractors use a contractor prequalification questionnaire to decide which trade subcontractors may bid at all. Safety record, financial standing, and project experience usually appear alongside the compliance sections, but the licensing and insurance pages are often treated as pass/fail screens, because they can be checked against a public record or a certificate.

Each question maps to a document with its own owner:

  • Licensing. The company license and, where the form asks, the individual qualifier's license or certification. The issuing body is a state board such as CSLB, TDLR, DBPR, DPOR, the Arizona ROC, or the Nevada NSCB, and each runs its own renewal cycle.
  • Bonding. The surety bond, issued by a surety rather than the state, which the form may ask about as a license condition or as a project-level requirement.
  • Insurance. Policies from your carriers, evidenced by certificates of insurance (COIs).
  • Continuing education. Hours earned against a state requirement, evidenced by provider completion records.

A reviewer who sees a stale date, a missing state, or a limit that does not match the project requirement has a simple reason to set the submission aside. The full consequences of a single stale credential are covered in how to prevent bid disqualification, and the package a bid ultimately needs is described in the bid-ready compliance package guide.

Answering the Licensing Section Without Guessing

The licensing section is where multi-state shops make the most avoidable errors, because the rules differ by state and the form usually asks for a uniform answer.

List every license, by issuer, with the current expiration date. Do not rely on the date you remember. Renewal cycles vary: California's CSLB active license renews every 2 years, according to LicenseClock, and CSLB mails a renewal notice about 60 days before expiration. Texas ACR contractor licenses are issued for one year and renewed annually, per TDLR. Arizona and Nevada contractor licenses run on 2-year terms. Virginia tradesman licenses expire 3 years from issuance, per Virginia DPOR. A shop licensed in several states is running several clocks, and the form asks you to state the result of all of them on a single day.

Answer the lapse and discipline questions from the record, not from memory. Prequalification forms often ask whether a license was ever suspended or allowed to lapse. Check the board's public lookup for each state and answer from what it shows. If a lapse occurred, disclose it and add a short factual explanation rather than leaving a gap for the reviewer to find on their own.

Treat the qualifier separately from the company. Some forms ask about the individual who holds the license on the company's behalf. If that person leaves, the company's answer changes the same day. Confirm with the issuing board how qualifier changes are reported before you certify anything.

Do not stretch a threshold. Licensing thresholds differ. California's unlicensed-contracting provisions under B&P Code § 7028 generally apply to projects where combined labor and materials exceed $1,000, according to LA Criminal Defense citing the code, and Arizona requires an ROC license for virtually all work over $1,000 in combined labor and materials, per Adapt Digital Solutions citing A.R.S. Title 32. If a form asks whether you are licensed for the scope of the project, answer for the specific classification and state, and confirm any classification question with the board.

Bond Questions: Amount, Surety, and What the Form Is Testing

A surety bond guarantees performance or financial responsibility to a third party, and a contractor carries one because a licensing board or project owner requires it. Prequal forms typically ask for the surety name, the bond amount, and sometimes the bond number and effective dates.

The difficulty is that the license bond and any project bond are different instruments. In California, the CSLB contractor license bond is $25,000, raised from $15,000 under Senate Bill 607 effective January 1, 2023, according to BudgetBonds. Under B&P Code § 7071.6, that bond must generally be on file before CSLB will issue, reactivate, reinstate, or renew a license (ContractorBond.org). California LLC contractors must additionally post a $100,000 LLC Employee/Worker Bond on top of the standard $25,000 bond, per SuretyBonds.com. Other states set amounts differently: Arizona bonds are volume-tiered, and Nevada bond requirements range from $1,000 to $500,000 depending on classification and financial profile, per the Nevada State Contractors Board.

Two practical points follow. First, answer with the amount on the bond currently on file, not the statutory minimum you assume applies. Second, a bond and a license renew on different schedules, so a valid license does not prove a valid bond. A fuller explanation of how bonds work and what each type covers is in the guide to contractor surety bonds. For exact bond amounts in any state, confirm with the licensing board or your surety.

Insurance: COIs, Limits, and the Point-in-Time Problem

The insurance section is the one reviewers check most mechanically. According to the Associated General Contractors of America, via Illumend, 95% of construction contracts require subcontractors to provide liability insurance certificates. Construction contracts typically require $1–2 million in general liability coverage, state-mandated workers' compensation, and commercial auto liability, per Vertikal RMS (2026). Your form will state its own limits, so compare each line against the carrier's actual policy rather than the previous year's answer.

Three details cause most of the errors on this section.

A COI is a snapshot. A certificate reflects a policy that typically renews annually, so it typically expires about one year after issuance (Illumend, ACORD-based guidance). It is also only a point-in-time document: if the underlying policy lapses or is canceled, the COI is no longer valid evidence of coverage even before its printed expiration date (TCDS Agency). Submitting a certificate you have not confirmed with your agent is a risk the form's signature line makes yours.

Policies renew on carrier schedules. A contractor's bond and workers' compensation policy renew on their own carrier schedules, independent of the CSLB license cycle, according to YourStanding. General liability, auto, and workers' compensation can each carry a different renewal date, so one certificate rarely covers the whole section.

Additional insured and endorsement language matters. Many forms ask whether the GC can be named as an additional insured or whether waivers of subrogation apply. These are policy endorsements, not certificate formatting. Ask your agent what your policies include before you answer yes. The explanation of insurance certificates for contractors walks through the parts of a COI and what each one evidences.

The CE Question and the State-by-State Trap

Not every form asks about continuing education, but those that do usually want a simple yes. The accurate answer depends on state rules that differ sharply.

  • Texas ACR (HVAC) contractor licenses require 8 CE hours per year, including 1 hour on Texas law and rules (TDLR).
  • Florida certified and registered contractors need 14 CE hours per 2-year renewal cycle, and a contractor holding more than one construction license completes the 14 hours only once per biennial period (LicenseClock and 1 Exam Prep, citing Florida DBPR/CILB).
  • Virginia tradesman renewal requires 3 CE hours per trade designation, and a tradesman with more than one designation completes CE separately for each (Virginia DPOR).
  • Nevada does not require state-level continuing education for contractor license renewal, though bond, insurance, and financial standing must remain current (Adapt Digital Solutions, citing NSCB).

A shop with technicians in Texas, Florida, and Nevada therefore answers the same question three different ways. Answer "current" only after checking each individual's completion records against the board's own requirement, and confirm the current hour minimums with the relevant board before your renewal window opens. Where the form asks for more detail than you can document, say so plainly instead of rounding up.

Keeping Contractor Prequal Documents Current Between Forms

The reason these sections feel urgent is that the evidence is gathered at the moment of the request. The alternative is to maintain a single current record: each license, bond, policy, and CE balance with its issuer, its identifying number, and its expiration date, reviewed on a fixed calendar rather than on demand.

A workable routine has four parts:

  1. One register, organized by issuer. Every credential appears once with its number, issuer, and expiration date.
  2. Tiered reminders. Alerts at 90, 60, 30, and 7 days give time to request a new certificate or complete CE before the date passes. The same logic underlies RAG status: green when comfortably current, amber as the window narrows, red when expired or about to be.
  3. A confirmation step for insurance. Ask the agent to confirm that the policy behind each certificate is in force before it goes into a submission.
  4. A state filter. Keep a view of which credentials a given project's state requires, so the form is answered for that jurisdiction only. The state-level compliance filter guide shows how to structure it.

Once the register is accurate, the evidence can be exported as one document instead of reassembled by hand. Compliance PDF export explains what a consolidated, dated export contains and how reviewers use it.

If you want to test the current state of your own records before the next form arrives, the Contractor Compliance Audit Workbook is an Excel + PDF workbook for a 2-hour internal compliance audit. It covers licenses, bonds, CE hours, and insurance. Running it against your files shows which answers on a prequalification form you can stand behind today and which need a call to a board, a surety, or an agent first.

Stay sharp on trade licensing.

Practical guides delivered to your inbox.

Browse our compliance templates

Browse templates

Related articles

Bonds, Insurance & Bid Readiness

Contractor Surety Bonds Explained: Types, Renewals, and Why They Lapse

A clear explanation of contractor surety bonds: the types you carry, how renewals work, and why a lapsed bond can cost you a license or a bid.

Read More
Bonds, Insurance & Bid Readiness

Tracking Bond Renewals: How to Stop a Bond From Lapsing Unnoticed

Bonds renew on a different cycle than licenses and lapse quietly. Here's how to track bond renewals so one never slips past you.

Read More
Bonds, Insurance & Bid Readiness

How to Avoid Bid Disqualification From Documentation Gaps

Most bid disqualifications come from a lapsed license or expired bond no one caught. Here's how to keep your bid documentation airtight.

Read More